Feet to Metres Converter
1 foot = 0.3048 m exactly. Type in either box.
—
0.3048, exactly
A foot is exactly 0.3048 metres. The figure is not a measurement but a definition, agreed in 1959 between the United States, the United Kingdom and four other countries.
1 ft = 0.3048 m exactly
That agreement is why every imperial length now derives from the metre. The inch was fixed at 2.54 cm, and the foot follows as twelve of them.
Aviation is the most visible survivor: altitudes are given in feet almost everywhere in the world, including countries that use metres for everything else. A cruising altitude of 35,000 ft is 10,668 m.
For mental work, take three tenths. 100 ft is about 30 m, against a true 30.48.
The foot
Twelve inches, and exactly 0.3048 metres by international agreement. The twelve is the useful part: it divides by 2, 3, 4 and 6, which is easier for dividing a length by eye than a base-ten unit.
It remains standard for human height, building dimensions and aviation altitude — flight levels are in feet almost everywhere in the world, including countries that use metres for everything else.
The metre
The SI base unit of length. It began in 1793 as one ten-millionth of the distance from the equator to the North Pole, then became a platinum bar, and since 1983 has been defined by the speed of light: the distance light travels in 1/299,792,458 of a second.
That definition makes the metre exact and reproducible anywhere, which is why every other unit on this page is now defined in terms of it — including the foot and the inch.
The working, step by step
Every line updates with whatever you type above. The point is the method, which is the same for any pair of units in this family.
The same quantity, two different numbers
One physical amount, read off two scales. The tick marks do not line up, and the gap between them is the conversion factor made visible.
How much is that?
A number is easier to judge next to something familiar.
Your turn
Reading a method and being able to use it are different things. Answer within half a per cent and it counts as correct.
Score: 0 of 0
How to use this converter
- Type into either box. The other side updates as you go; there is no button to press.
- Swap the direction with the button between the boxes, carrying your value across.
- Set the decimals if the default is more or less precision than you need.
- Copy the answer with its unit, ready to paste.
- Use the shortcut buttons for the values that come up most often.
- Share the result. The address bar tracks what you type, so the link you copy opens on the same number.
Common uses and tips
Where length conversions come up
- Height. Quoted in feet and inches in Britain and America, and in centimetres nearly everywhere else. 5 ft 10 in is 178 cm.
- Buying things online from another market, where the dimensions are in units your tape measure does not have.
- DIY and building, where materials come in metric sizes and older plans are in imperial.
- Screens, tyres and pipes, which stay in inches worldwide even in fully metric countries.
- Running and cycling, where race distances are metric and training apps may report either.
Numbers worth carrying
- 1 inch = 2.54 cm exactly. Everything imperial in this family descends from it.
- 1 foot = 30.48 cm, twelve inches.
- 1 yard = 0.9144 m, a little shorter than a metre.
- 1 mile = 1.609 km, and 1 km = 0.621 mile.
- A metre is about 39.37 inches, or 3 ft 3 in.
Mental shortcuts
Kilometres to miles: multiply by six and drop the last digit. 80 km × 6 = 480, drop the digit for 48 miles, against a true 49.7.
Miles to kilometres: add sixty per cent. 50 miles plus 60 % is 80 km, against a true 80.5.
Centimetres to inches: divide by 2.5 and take off a little. Dividing by 2.5 gives an answer about 1.6 % high.
Mistakes worth avoiding
- Feet and inches are not decimal. 5.5 feet is 5 ft 6 in, not 5 ft 5 in. Multiply the decimal part by twelve.
- Do not use length factors for area or volume. A foot is 0.3048 m, but a square foot is 0.0929 m² and a cubic foot 0.0283 m³.
- Check which mile. A nautical mile is 1,852 m, about 15 % longer than a statute mile.
Values people look up most
Each one opens the converter with the number already in it.
- 1 ft to m
- 2 ft to m
- 3 ft to m
- 5 ft to m
- 6 ft to m
- 8 ft to m
- 10 ft to m
- 12 ft to m
- 15 ft to m
- 20 ft to m
- 25 ft to m
- 30 ft to m
- 50 ft to m
- 100 ft to m
- 200 ft to m
- 500 ft to m
- 1,000 ft to m
- 5,000 ft to m
- 10,000 ft to m
- 35,000 ft to m
Quick reference
| Feet | Metres |
|---|---|
| 1 ft | 0.3048 m |
| 3 ft | 0.9144 m |
| 5 ft | 1.524 m |
| 6 ft | 1.8288 m |
| 10 ft | 3.048 m |
| 50 ft | 15.24 m |
| 100 ft | 30.48 m |
| 1,000 ft | 304.8 m |
| 10,000 ft | 3,048 m |
| 35,000 ft | 10,668 m |
Questions people ask
What is the formula for feet to metres?
Multiply by 0.3048.
Is 0.3048 exact?
Yes, by the 1959 international yard and pound agreement.
What is 6 feet in metres?
1.8288 m.
What is 35,000 feet in metres?
10,668 m.